Tag Archives: malware

BlockSync Project

Posted on by

Welcome to the BlockSync Project

This project aims to provide an efficient way to provide mutual protection from deemed bad actors that attack Internet facing servers. The result will be an open source set of communication tools that use established protocols for high speed and light weight transmission of attacker information to a variable number of targets (unicasting to a possibly large number of hosts).

Background

There are many open source firewall technologies in widespread use, most based on either packet filter (pf) or netfilter (iptables). There is much technology that provides network clustering (for example, OpenBSD’s CARP and pfsync; netfilter; corosync and pacemaker), however it’s difficult for disparate (loosely coupled) servers to communicate the identity of attackers in real time to a trusted community of (tightly coupled) peers. Servers or firewalls that use state-table replication techniques, such as pfsync or netfilter, have a (near) real-time view of pass/block decisions other members have made. There needs to be a mechanism for loosely coupled servers to share block decisions in a similar fashion.

Our goal is to create an open source tool for those of us that have multiple Internet facing servers to crowd source information that will block attackers via the firewall technology of choice (OpenBSD/FreeBSD pf/pfSense, iptables, others).

Project Page

All project files are still private yet, but when we publish to GitHub or SourceForge, this section will be updated.

Funding

We have published a GoFundMe page to acquire more lab equipment here at gofundme.com/BlockSync

Malware Investigation Tools and Notes

Posted on by

Investigating possible malware involves both detection and identification phases. Here are some notes regarding the tools I commonly use for these two phases .. note this is intended to be a living document so may change as I learn of new resources or as older resources become stale or no longer very useful.

WARNING: Links shown below may lead to sites with active malware. Do not navigate to any site or link unless you know what you are doing.

Detection

Tools like HP TippingPoint IPS do a good job of detecting vulnerabilities (versus exploits) and also use vulnerability research and lighthouse sensors across the world to confirm infected systems (by IP) and sites (by domain).

Research

Both Google and Scumware have good domain and URL status reporting data.  URL shortening services are notorious for masking domains that have become infected, although there may be a large percentage of legitimate sites to which they refer. An example is the WordPress site wp.me:

http://www.google.com/safebrowsing/diagnostic?site=wp.me

http://www.scumware.org/report/wp.me

 Broad industry trends and general knowledge of attacks, outbreaks and other relevant news can be found on various blog sites:

hp.com/go/hpsrblog

 

Phishing attacks getting better .. iTunes Receipts

Posted on by

So I get a call this morning from a family member who is freaking out over a six hundred dollar iTunes invoice. Fortunately I knew this person didn't have an iTunes account (they use mine), so I knew right away it was a fraud. On inspecting the invoice, there were so few errors it's chilling. If this had of been an invoice from the (Acme Widget Company) that I do have an account with .. it's possible it may have worked. 

This is particularly evil, since it's associated with the Zeus trojan that steals banking credentials

The quality of phishing emails have dramatically improved as the quality assurance by malware miscreants improves. 

iTunes phish

On closer inspection, there were three very subtle errors made on this iTunes phishing attack:

  1. No street address was shown.  iTunes receipts always have your street address listed and spamming dirt bags don't have that (we hope).
  2. Receipts (that I've paid attention to) come with an American style date format .. month / day / year.  Canadian or European formats are typically day / month / year or year / month / day.  This one is  day / month / year.
  3. Modern corporate invoicing systems don't include leading zeros. Also the quantity and dollar amounts don't add up.

Every web hyper-link in this invoice except for the Apple Store Support and the Apple Legal links point to a non-Apple site.  All the links in iTunes invoices point to Apple.  In this case, the infected domain was  medicineni.com . This is particularly evil, since it's associated with the Zeus trojan that steals banking credentials. Bogus LinkedIn invites have also been confirmed to be coming from the Zeus botnet.

We still need to stay awake to the attacks by these malware miscreants, because they are getting better by the month.

w3af web security assessment tool gets support from Rapid7

Posted on by

Rapid7, which purchased the Metasploit attack framework last year, has agreed to sponsor the open source w3af web assessment and exploit project. This is fantastic news for web application development teams, since it shows the open source (and hence more affordable) tools they can use to improve the security of their applications are maturing.

Websites like sectools.org maintain lists of various security tools and point to numerous open source web application fuzzing and testing tools, including BurpSuite, Nikto, WebScarab, Whisker and Wikto. Although each of the open source tools I use have various strengths, w3af is IMHO the first reasonable challenger to commercial web application testing tools like IBM’s AppScan.

Can we please get rid of bad input validation errors now??

For a commercial IT security professional that wants to help an internal web application development team improve the security of their applications, tools like IBM’s AppScan and Acunetix WVS can save valuable time by generating reports that include not only the vulnerable URI but also include vulnerability background information (CVSS, OWASP, WASC), the specific HTTP request/response strings and suggested code fixes. This is particularly valuable to a security architect or operations role that is pressed for time (an army of one anyone?).

The w3af support from Rapid7 will enable this excellent tool to mature more quickly and improves the capability for any web development team, regardless of funding, to improve their security. Can we please get rid of bad input validation errors now?? My recent thesis illustrated the downright depressing numbers of SQL injection flaws that continue to exist. With tools like w3af, there is no excuse left for web developers to press applications into production with these injection flaws that are trivial to avoid. At the very least a survey of the NIST National Vulnerability Database does show the number of SQL injection flaws starting to drop. Unfortunately they still substantially outnumber traditional memory corruption flaws such as buffer overflows.

Explosion of SQL buffer errors

Explosion of SQL buffer errors

As you can see, the story up to 2008 was pretty grim for web applications – SQL injection flaws increased by over 1,500% in the same time buffer overflow errors increased by just over 500%.

Although it looks like there has been a reversal of the shocking explosion of SQL injection flaws, the sheer volume of these web application flaws is astonishing .. especially since injection flaws have been around for about 10 years. Not exactly a problem that has recently snuck up on us.

Web developers that still turn out applications that contain SQL or command injection errors and most cross site request forgery errors are simply guilty of gross negligence.

Despite the web development industry knowing these errors exist and good developers designing and coding to avoid these issues, there is still a need to build sufficient forensics around externally facing (publicly accessible) applications to enable reconstruction of attacks. In my next post, I outline a summary of my thesis “Effective SQL injection attack reconstruction using network recording”.

How to secure your home PC

Posted on by

Whether you have a Mac or a Windows PC, there are some basic steps you can take to reduce the risk and personal impact of a malware infection.  This advise is especially impactful when you have just purchased a new Mac or Windows system. There are several steps that you can take to protect your new investment and more importantly your information. In the following detail, I mainly focus on Windows as that’s the main technology that my non-IT type friends ask about.

Basically what you should be doing is:

  1. Ensure that a hardware firewall/router is in between the internet and the PC (I’ll just call it a firewall from now on)
    • Use a recognized brand name like Linksys, avoid the no-name generics as they often have bad defaults and don’t implement the stateful-packet-inspection that you want to filter out most of the cruft on the Internet from reaching your PC
  2. Ensure all default passwords on the firewall and PC have been changed
    • When you initially turn on the power to your PC and to your firewall, do NOT have them connected to your cable or DSL modem initially.  Do the setup of your firewall and PC first in order to ensure malware doesn’t have a chance to get at your shiny new PC before you’ve turned on the needed protection
    • Point a browser to your firewall (likely 192.168.0.1 or 192.168.1.1) and change the default administrator password.  This is very important, as some malware will seek out your firewall and try to use the manufacturer default password to change things like your DNS server settings – inserting the bad guys in between you and the rest of the Internet (eg. forcing your traffic to them first before it goes to your bank)
  3. All normal accounts used for day-to-day business on the computer should NOT have administrator privilege (see my post on running without admin privileges)
    • On Windows XP, Vista (and I think 7), the default “user” that accesses the PC has full administrative privilege, that enables software  installation and configuration changes.  This is very dangerous, as malware that you come in contact with from infected emails or websites use this privilege to install their spyware, keyloggers, backdoors and other nasty stuff on your PC – without your explicit permission
    • Set a password for your Administrator account
    • Create a new user right away, before you setup your email, music, photos, documents, etc; ensure that new user is NOT a Computer Administrator
    • Always login with this non-Administrator username for your day-to-day use; only use the Computer Administrator username for software installation and configuration changes.
  4. Never surf the Internet with an account that has administrative privilege
  5. If this is a common PC for a business, ensure employees accounts are individually assigned (if practical). Ensure those employee accounts are not administrators (unless there is a need and a high degree of trust)
  6. Run a good commercial anti-virus program with annual software support (or a subscription)
    • There are some good free AV packages (AVG, Clamwin, Avast) .. Google them for the links
    • Sophos makes a good Mac AV package .. yes, Macs are vulnerable to malware as well; it’s just not as prevalent
  7. Finally ensure regular (daily) backups are being run to protect your business, financial, customer information from loss if there is a problem with the PC
  8. For setup of your wireless access point (if you have one .. sometimes it’s built into the router/firewall)
    • Chose wireless encryption of at least WPA or WPA2 .. never use WEP or no encryption
    • There is no significant increase in security by obscuring your network name (SSID)
    • Don’t use any personally identifiable information in your network name

If you are unsure of how to do any of these steps, get one of your computer knowledgeable friends to help you.  Of course if you are purchasing a new system right now, I’d strongly recommend you check out Apple’s Mac products.  They’re not immune to malware, but the architecture and core are by design much less vulnerable to the types of malware that plague Windows.

Reducing malware risk by removing local Administrator privileges

Posted on by

Running day-to-day with a Windows account that has Administrator privileges is a recipe for disaster.  Casual browsing of a website that is infected or inadvertent opening of infected attachments can result in an infection through the user’s Administrator privileges.  Something like 92% of Microsoft critical vulnerabilities announced in 2008 could have been mitigated by operating day-to-day as a normal user.  Splitting your accounts into a normal account and admin account is a good idea, but it can lead to some headaches when the normal user needs to run temporarily as Administrator.

Fortunately there are some work arounds that can be used to temporarily elevate the user’s privileges to Administrator.  Most of these involve the RUNAS command:

File explorer
If you’re running IE7 under WinXP, in order to run Windows Explorer with the runas command, it must be run as a separate process. A quick way to do this, without having to change your Folder Options settings, would be to run an instance of Explorer with the undocumented parameter /separate, like this:

runas /user:domain\username "explorer /separate"

Command Line Prompt
You can add a shortcut on the task bar with the following syntax to get an Administrator cmd prompt:

%windir%\system32\runas.exe /user:yourdomain\a-someuser cmd

yourdomain is the name of your AD domain if you have one, if not, leave it out.  a-someuser is a suggested naming convention for the Administrator account associated with the user named someuser.